Canon MB5400 SERIES Online Manual page 374

Setup Completed
Appears after performing network setup and clicking Set to close the window.
Not Connected
Indicates the printer is required to perform wireless LAN setup.
Performing/Changing Wireless LAN Settings
Not Set
Indicates the printer cannot be used on network. Specify an IP address or enable IPv6.
IP Address Overlap
Indicates the IP address is duplicated to another printer.
Unknown
Indicates the printer used in the past cannot be used currently.
Note
• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.
4. IP Address
Displays the printer IP address.
Note
• If USB is selected from the pulldown menu on the toolbar, "-" is displayed for the interface
(wireless/wired LAN) disabled on the printer setting.
5. Location
Displays the printer location if it is registered.
Note
• If USB is selected from the pulldown menu on the toolbar, nothing is displayed.
Assigning Printer Information
6. Connection Method
Displays printer connection method (wired or wireless LAN).
Note
• If USB is selected from the pulldown menu on the toolbar, either of the LAN connection method
(wired or wireless) available for the printer is displayed.
• If the printer supports both of the LAN connection methods, the printer is recognized as two
printers and they are displayed separately.
• If the printer does not support wired LAN, wired LAN is not displayed.
• If you are using IJ Network Device Setup Utility on the computer which does not support
wireless LAN, wireless LAN is not displayed.
• If you are using the printer with direct connection, neither wired LAN nor wireless LAN is
displayed.
374