Gain Access To The Settings - Cisco TelePresence SX10 User Manual

33
Settings

Gain Access to the Settings

To gain access to the Settings
menu, navigate to the upper
left corner of the screen and
press OK on the remote
control. Then navigate down
to System Information (number
two from the bottom of the
menu) and press OK again.
The Settings shows basic information about the system as well as providing
access to the Setup Wizard and the ability to force a restart of the system.
About Settings
The System information page
provides information on IP address,
MAC address, SIP Proxy, software
version installed and device name.
The system can be restarted from
here and setup wizard is available
via Advanced settings.
D1509708 User Guide
Cisco TelePresence TRC 6
Produced: July 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.