Enable Do Not Disturb - Cisco TelePresence SX10 User Manual

15
Availability

Enable Do Not Disturb

Starting from Home screen, use the Cursor keys on the
remote control to select the Settings field in the upper
left corner of the screen.
Use the Down Cursor button on the remote control to
navigate down to Do Not Disturb (one step down) and
use the OK button on the remote control to set it to On
or Off (toggling). If your system has Intelligent Proximity
enabled you will need to press the Down Cursor button
twice.
Press OK on the remote control.
Press the OK key on the remote control to exit the menu,
putting changes into effect.
About Do Not Disturb
Your system can be set up so that it
does not respond to incoming calls.
When set to Do Not Disturb, ringtones
are muted and call attempts made
by others to reach you will appear as
missed calls. You may, however, place
calls as much as you like.
As default, there is a 60 minutes
timeout on the Do not disturb (after
which the system will return to normal
operation), but this may have been
changed to a different setting by your
Video Support Team.
D1509708 User Guide
Cisco TelePresence TRC 6
Produced: July 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.