Far End Camera Control - Cisco TelePresence SX10 User Manual

31
Camera

Far end Camera Control

Navigate to Participants
and press OK on the remote control. A list of the
participants will then appear.
To control the far end camera navigate to Camera
(number two from the right) and click OK on the remote
control.
in the upper right corner
A menu showing a list of the participants in the call will
now appear. Navigate to the participant, whose camera
you want to control and press OK on the remote control.
A submenu will now appear.
If you select Drop and press OK, you will disconnect that
participant.
Adjust Pan, Tilt and Zoom as per your liking. Use OK or
Back on the remote control to exit.
About Far End Camera
Control
Many video systems have a remotely
controllable camera. Such systems
allow you to use a remote control to
change pan, tilt, and zoom.
If the far end (those you are in a
meeting with) have such a system,
you may control their camera during
the call.
D1509708 User Guide
Cisco TelePresence TRC 6
Produced: July 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.