Start And Stop Presentation - Cisco TelePresence SX10 User Manual

22
Share Content

Start and Stop Presentation

Make sure your presentation source is connected and
On. You may need to select Share (located in the center
bottom of the screen, if it appears) and press OK on the
remote control.
The size of the shared image is controlled by means of
the Minimize/Maximize field which appears along the
bottom of the display (number 2 from the left). Select
this and press OK on the remote control, if needed.
Your source will now be shared.
To stop sharing content, select Stop sharing (which
appears along the bottom of the display (number 1 from
the left) and press OK on the remote control.
About Content Sharing
Use this feature to share content
on your PC in a call or outside a
call. The procedure is the same, but
shown here is the in-call way only.
D1509708 User Guide
Cisco TelePresence TRC 6
Produced: July 2016 for CE 8. 2
All contents © 2010–2016
Cisco Systems, Inc. All rights reserved.