Levelling - Bosch WAT Series Instruction Manual And Installation Instructions
Hide thumbs
Also See for WAT Series:
Table of Contents
Advertisement
Connection
Drainage into a washbasin
■
Drainage into a siphon
■
The connection point must be
secured using a hose clamp with a
diameter of 24 - 40 mm (available
from specialist dealers).
Drainage into a plastic pipe with
■
rubber bushing or into a drainage
pit
Positioning and connecting
Levelling
Align the appliance using a spirit level.
Incorrect alignment may result in loud
noises, vibrations and machine
"movement".
Loosen the lock nuts using a WAF17
1.
spanner, by turning it in a clockwise
direction.
Check the alignment of the washing
2.
machine with a spirit level, and
adjust it if necessary. Change the
height by turning the appliance feet.
All four appliance feet must stand
firmly on the ground.
The lock nuts on all four appliance
3.
feet must be screwed tightly against
the housing using a suitable WAF17
spanner. In doing so, hold the foot
tight and do not adjust its height.
en
33
Advertisement
Table of Contents
