Operating The Appliance; Preparing The Washing Machine; Select Programme/Switch On The Appliance; Change The Programme Default Settings - Bosch WAT Series Instruction Manual And Installation Instructions

Operating the appliance

en
1
Operating the
appliance
Preparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 28.
Connect the mains plug.
1.
Turn on the tap.
2.
Open the door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it, before you can set a program.
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
The program default settings for the
selected program appear in the display
panel:
Temperature*,
■
The maximum load and the duration
■
of the program (alternately)
Energy consumption*.
■
*depending on the model
16
Change the programme
default settings
You can use the default settings for
each wash cycle or change them.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
The settings are not saved after
switching off the washing machine.
Default program settings~ Page 14

Select additional programme

settings

By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the program
progress.
The button indicator lamps light up if a
setting is activated.
The settings are not saved after
switching off the washing machine.
Additional program settings
~ Page 15