Checking For Blockages - Shark Rotator NV680 Manual

STEP 1
CHECK FOR BLOCKAGES
1
Use a coin to unlock the 3 locks on the
bottom of the floor nozzle.
STEP 2
2 A portion of the base is removable to
allow for better access to the brushroll
and exposure to the airway. Shine a
flashlight from the bottom to check for
possible blockage in the airway.
1. 8 0 0 . 7 9 8 . 7 3 9 8
STEP 3
3 Remove any string, carpet fibers or
hair that may be wrapped around
the brushroll. There is a groove on
the brush bar that allows a pair of
scissors to cut across it to loosen
up the debris.
STEP 4
4 To reassemble, replace base by
lining it up along the front of the
nozzle. Push down to snap into
place. Lock the 3 locks.
1 0