Using The Wps Button - Samsung LED 7500 series E-Manual

51
From the IP Settings
Gateway, and the
IP Settings
IP Setting
IP Address
Subnet Mask
Gateway
DNS Setting
DNS Server
OK
61
The TV attempts to connect to the network again using the specified settings. A confirmation
message is then shown once a connection is established. Select
"
The network connection speed may differ depending on the DNS server settings.
"
For details on the DNS server settings, contact the Internet service provider (ISP).

Using the WPS Button

If the router has a WPS push button, you can use it to connect the TV to the router automatically. WPS
automatically configures the SSID and WPA key settings.
11
Setting Network type
21
Select WPS(PBC)
31
The TV automatically acquires the SSID and security key settings and connects to the network. A
confirmation message is then shown once a connection is established. Select
screen, set IP Setting
DNS Server values, and then select OK.
Enter manually
0.0.0.0
0.0.0.0
0.0.0.0
Enter manually
0.0.0.0
Cancel
to Wireless automatically displays a list of available wireless networks.
and then press the router's WPS button within two minutes.
to Enter manually, enter IP Address, Subnet
OK to proceed.
OK to proceed.
Mask,