Picture Quality; Applying The Current Picture Quality Setting To Another Input - Samsung LED 7500 series E-Manual

Picture Quality

Screen Menu > Picture
Choose a Picture Mode
corresponding setting to be adjusted. Adjust the value by dragging left/right on the touch pad and
change the setting by dragging up/down on the touch pad. Adjusted values are applied to the current
source and will remain in effect the next time the source is selected. When connected to a computer
via an HDMI-to-DVI cable, only the
●
Backlight: Adjusts the brightness of individual pixels. Decreasing the brightness reduces power
consumption. This option is only available for LED TVs.
●
Cell Light: Adjusts the brightness of the panel. Decreasing the brightness reduces power
consumption. This option is only available for PDP TVs.
●
Contrast: Adjusts the screen contrast.
●
Brightness: Adjusts the overall brightness.
●
Sharpness: Sharpens or dulls the edges of objects.
●
Color: Adjusts the overall color saturation.
●
Tint (G/R): Adjusts the ratio of green to red. Increase the green value to saturate the greens and
the red value to saturate the reds.

Applying the Current Picture Quality Setting to Another Input

Screen Menu> Picture
You can apply the picture quality setting that you configured for the TV to all external devices
connected to the TV.
To apply the setting to all external devices connected to the TV, select
setting to the current input, select
and then select the following options to display a slide bar that allows the
Color
Try Now
> Apply Picture Mode
Current
and Tint (G/R) adjustment options can be chosen.
Try Now
Try Now
Try Now
Try Now
Try Now
Source.
All Sources. To only apply the