Reconnecting The Smart Touch Control; Battery Low Alarm - Samsung LED 7500 series E-Manual

Reconnecting the Smart Touch Control

If the Smart Touch Control stops operating or works abnormally, replace the battery as this may
be caused by insufficient battery power. If the problem persists, press the PAIRING button on the
Smart Touch Control to restore pairing with the TV. The PAIRING button cannot be accessed without
removing the Smart Touch Control's battery cover. Within a distance between 30cm to 4m, point the
Smart Touch Control to the TV receiver and press the PAIRING button. When pairing is complete, the
pairing image displays at the bottom left of the TV screen.
<The Smart Touch Control's pairing button>

Battery Low Alarm

If the battery becomes low while using the Smart Touch Control, the following alarm window blinks
and appears at the bottom of the left screen. If the alarm window pops up, replace the batteries of the
Smart Touch Control. Use alkaline batteries for longer usage.
<Low battery alarm window>