Step 3: Connect The Mouse And Keyboard To The Usb Connectors.; Step 4: Attach A Network Ethernet Cable To An Ethernet Port.; Front Panel; Step 1: Press The Soft Power Switch To Activate The Rpu. - ETC Eos Remote Processor Unit 3 Setup Manual

ETC Setup Guide
Eos RPU 3
Step 2:
Step 3:
Step 4:
Step 5:

Front Panel

20 user-configurable
buttons
(default shown)
Live Tab
Blind Scroll Lock
Step 1:
Step 2:
Step 3:
Step 4:

Start Up

After connecting power to the unit, press the soft power button on the front of the console.
By default, the RPU will boot into the Eos environment as a "master". If you wish to designate
your RPU as something other than a master, you must exit the Eos environment and choose a
different designation from the Eos Configuration Utility welcome screen.
For more information on multi-console terms such as "Master" or "Backup", please see Appendix
C: Multi-console and Synchronized Backup in the Eos Ti, Eos, and Gio Operations Manual.
RPU 3
Connect any monitors to the proper ports on the back of the RPU.
Eos RPU 3 supports up to 3 monitors
using the following combinations:
Signal
Type
Display Port
Physical
Port
Display Port
Yes
Multitouch monitors need to be Windows 7 or 8 Compatible.
Displays using an active adapter have a maximum resolution
of 1920x1200.
Connect the mouse and keyboard to the USB connectors.
Attach a network ethernet cable to an ethernet port.
Once all accessories have been connected, you may activate the hard power switch
on the rear panel.
Escape Select M901
M905
Press the soft power switch to activate the RPU (check rear panel to ensure power is
connected and hard power switch is on).
Backlit indicators identify the operating status (master, backup, client, and so on) of
the unit.
USB port is provided for easy show loading to or from a USB storage device.
20 buttons are configurable from the Eos Configuration Utility (ECU). They are set to
a default configuration. The label strips for these buttons are removable and
reversible. Any changes to the button configuration can be written on the opposite
side in pencil.
DVI VGA
Yes
Yes
with Active
with Adapter
Adapter
Backlit
Indicators
M902 M903 M904 Stop/Back
Primary
Master
M906 M907 M908 Go
Page 2 of 3
Soft Power
Switch
Backup Client
Tracking Expand
USB Port
Electronic Theatre Controls, Inc.