Advertisement
Quick Links
ETC Installation Guide
Unison Echo
Overview
Echo preset stations are used to
activate built-in presets in
compatible power control products.
Stations mount using a standard
single-gang back box (RACO 690 or
equivalent), or an optional surface
mount backbox (ETC part number
7081A2004-1).
Station faceplates and buttons are available in cream, ivory, grey, black and
signal white. Preset stations are provided with station electronics, buttons,
faceplate, a termination kit, and installation hardware.
Custom Configuration Option
This document guides through the installation and local setup of the Echo
Preset Station. Advanced functionality is available using EchoAccess. For more
information, reference the EchoAccess Mobile App integrated help system.
Note:
Corporate Headquarters
London, UK
Tel +44 (0)20 8896 1000
Rome, IT
Tel +39 (06) 32 111 683
Holzkirchen, DE
Tel +49 (80 24) 47 00-0
Hong Kong
Tel +852 2799 1220
Web:
www.etcconnect.com
Product information and specifications subject to change.
7140M2110
Rev B
Released 2016-02
Echo Preset Station
®
Preset Station
To use the configuration settings applied using EchoAccess, DIP
switch 2 (Custom Config) must be enabled.
Middleton, Wisconsin, USA
Service: (UK)
Service: (UK)
service@etceurope.com
Service: (DE)
Service: (Asia)
service@etcasia.com
Copyright © 2016 ETC. All Rights Reserved.
Tel +608 831 4116
service@etceurope.com
techserv-hoki@etcconnect.com
ETC intends this document to be provided in its entirety.
Page 1 of 8
Service: (Americas)
service@etcconnect.com
Electronic Theatre Controls, Inc.
Advertisement
Related Manuals for ETC Unison Echo
Summary of Contents for ETC Unison Echo
- Page 1 Web: www.etcconnect.com Copyright © 2016 ETC. All Rights Reserved. Product information and specifications subject to change. ETC intends this document to be provided in its entirety. 7140M2110 Rev B Released 2016-02 Echo Preset Station Page 1 of 8 Electronic Theatre Controls, Inc.
-
Page 2: Prepare For Installation
Preset stations connect to the EchoConnect station communication bus. EchoConnect is a bidirectional protocol that uses one pair of wires (data+ and data-) for both data and power. ETC recommends using Belden 8471 (or approved equal) Class II wire. The total combined length of an EchoConnect wire run (using Belden 8471, or equal) may not exceed 1,640 feet (500m). -
Page 3: Installation
ETC Installation Guide Echo Preset Station DIP Switch Settings Functionality is set using DIP switches located just beneath the rotary and DIP switches. The label on the rear of the station identifies these components and functions. Switch # Use Off - When this is set to Off, the “Off” function of the station is not provided. -
Page 4: Connect The Wiring
ETC Installation Guide Connect the Wiring Step 1: Pull all required wiring (data+, data -) into the back box. As needed, pull an additional ESD ground wire (required only Ground when the station is not spade installed in grounded metal conduit). - Page 5 ETC Installation Guide Echo Preset Station and the black lead from the power pigtail into the terminals. Then close the levers. Topology of a Installed control wire single station installation Pigtail wire Topology of Installed control wire multiple stations Installed wire to next station...
-
Page 6: Installing The Faceplate
ETC Installation Guide Echo Preset Station Step 2: If needed, fold sections of the spacer over each other and press them together to achieve the required thickness to fill the gap between the station and backbox. Cut off any excess spacers and place the spacer between the station and backbox. - Page 7 ETC Installation Guide Echo Preset Station Settings Settings for Basic config mode (DIP switch 2 set to Off) can be modified locally including changing which presets are assigned to the station, changing the button LED color, and preset recording at the station.
- Page 8 Service If you have any difficulties installing your system or with system startup please contact ETC Technical Services at the office nearest you. ETC contact information is located at the bottom of page 1. Echo Preset Station Page 8 of 8 Electronic Theatre Controls, Inc.