Front Fork Installation - Coleman CT200U-CL Assembly Instructions Manual

FRONT FORK INSTALLATION

1. Install front Fork Assembly by
inserting the 10mm steering bolt
through the assembly in the
following order:
Top bracket, Small 10mm
Washer, Steering Neck, Large
10mm Washer, Bottom Bracket,
Large 10mm Washer, Lock Nut
1. Tighten Lock nut snug,
Note: Do not over
tighten Lock nut. Over
tightening will cause
the steering to bind .
10mm Large Washers 10mm Small Washer
Small Washer
Steering Neck
Bottom Bracket
Large Washer
2
10mm Steering Bolt
10mm Lock Nut
Steering Bolt
Top Bracket
Large Washer
Lock Nut