Coleman 70DX 2020 Assembly Instructions

Dirt bike

For questions about these assembly Instructions, call Coleman

Powersports toll free 888-405-8725

WARNING

Never Attempt to start this Dirt Bike without reading and

understanding the Owner's/Operator's manual. The Owner's/

Operator's manual provides information on safety, parts,

functions, pre-ride inspection, starting and maintenance.

ASSEMBLY/INSTRUCTIONS

Model: 70DX

Tools needed for assembly

8mm,10mm

Ratchet

Wrench

Phillips

Screwdriver

032615

Table of Contents

Do you have a question about the 70DX 2020 and is the answer not in the manual?

Page 1 ASSEMBLY/INSTRUCTIONS Model: 70DX For questions about these assembly Instructions, call Coleman Powersports toll free 888-405-8725 WARNING Never Attempt to start this Dirt Bike without reading and understanding the Owner’s/Operator’s manual. The Owner’s/ Operator’s manual provides information on safety, parts, functions, pre-ride inspection, starting and maintenance.
Page 2 Removal From Crate NOTE: SOME HARDWARE MY ALREADY BE AT ITS ASSEMBLY LOCATION ON THE DIRT BIKE Removed from crate Hardware Carton ITEMS IN HARDWARE CARTON Tool Kit Owner's Manual Handlebar Pad Top Clamps M6 x35 Bolts Shift Lever Handlebar assembly Hardware...
Page 3 Handlebar Assembly STEP 1 NAME SPEC. M6X35 HEX HEAD BOLT TOP CLAMPS HANDLE BAR BOTTOM CLAMPS UPPER TRIPLE BRACKET Torque M8 x 20bolts - 20ft.lbs Shift Lever Installation STEP 6 NAME SPEC. M6X20 GEAR LEVER NOTICE: THESE ARE ASSEMBLY INSTRUCTIONS ONLY. BEFORE STARTING THE DIRT BIKE FOR THE FIRST TIME , REFER TO THE OWNERS MANUAL FOR PRE-RIDE INSPECTION PROCEDURES.
Page 4 Handlebar Pad Installation...