Fisher & Paykel CG363MLNGB1 User Manual page 19

To clean the burner head
Lift out the burner head and clean with a cloth or scourer. The burner head gets much hotter
1
than the pan support pins and for this reason it is not finished with an easy-clean coating. If
cooking splatter and spills get burnt onto the burner head, scrub with a mildly abrasive cleaner
and a soft cloth. Ceramic cooktop cleaner is suitable for this.
Replace the clean burner head.
2
Press the on/off power button to turn the CookSurface on.
3
Lower the pan supports before using to check they have been reassembled correctly (see Fig. 4).
4
If spilled or burnt food has stuck the pan supports in the 'down' position, soften the spill with a
damp, soapy, soft cloth and remove the food.
Cleaning the on/off power button and the control dials
Wipe these with a soft cloth and mild detergent. You can remove the control dials by pulling
them up and out. When replacing the dials, make sure you orientate them correctly.
On/Off power
button
Care and cleaning
Fig.5 Remove the control dials by pulling them up and out
17
Control dial
US
CA