Table of Contents
Advertisement
Figure 6
1. Fuel line
2. Elbow tting
5. Slide the end of the fuel line onto the elbow
fitting (Figure 6).
6. Secure the fuel line in place with the fuel line
clamp (Figure 6).
Step
4
Installing the Discharge
Tunnel Plug
Parts needed for this step:
1
Discharge tunnel plug
Procedure
1. Open the discharge door by pulling forward on
the handle and moving it rearward (Figure 7).
Hold the discharge door handle to prevent the
spring-loaded door from closing while you
insert the plug.
3. Fuel valve
Figure 7
1. Discharge door handle
2. Since the plug is slightly wider than the
discharge tunnel opening, rotate the plug
clockwise slightly while inserting it (Figure 7).
Note: Ensure that the arrow on the plug
decal points upward.
3. Push the plug all the way in until the spring clip
on the bottom of the plug clicks into place,
locking the plug securely into the discharge
tunnel (Figure 8).
Figure 8
1. Spring clip
4. Release the discharge door handle to lock the
top of the plug.
9
2. Plug, rotated clockwise
Advertisement
Table of Contents
