Maintenance And Storage - Toro 22176 Operator's Manual

• Only start engine from the operator's position.
• Be sure of your footing while using pedestrian
controlled equipment, especially when backing
up.
• Walk, don't run.
• Never operate on wet grass. Reduced footing
could cause slipping.
• Slow down and use extra care on hillsides. Be
sure to travel in the recommended direction
on hillsides.
• Use caution while operating near drop-offs.
• Slow down and use caution when making turns
and when changing directions on slopes.
• Never raise deck with the blades running.
• Never operate with the discharge deflector
raised, removed or altered, unless using a grass
catcher.
• Do not change the engine governor setting or
overspeed the engine.
• Stop on level ground and shut off engine
before leaving the operator's position for any
reason including emptying the catchers or
unclogging the chute.
• Stop equipment and inspect blades after
striking objects or if an abnormal vibration
occurs. Make necessary repairs before
resuming operations.
• Keep hands and feet away from the cutting
units.
• Look behind and down before backing up to
be sure of a clear path.
• Be aware of the mower discharge direction and
do not point it at anyone.
• Do not operate the mower under the influence
of alcohol or drugs.
• Use care when loading or unloading the
machine into a trailer or truck.
• Use care when approaching blind corners,
shrubs, trees, or other objects that may obscure
vision.

Maintenance and storage

• Wait for all movement to stop before adjusting,
cleaning or repairing.
• Clean grass and debris from cutting unit,
muffler, and engine to help prevent fires.
• Clean up oil or fuel spillage.
• Let engine cool before storing and do not store
near flame.
• Do not store fuel near flames or drain indoors.
• Never allow untrained personnel to service
machine.
• Use care when checking blade.
• Wrap the blade or wear gloves, and use caution
when servicing.
• Only replace blade. Never straighten or weld
them.
• Keep hands and feet away from moving parts.
• If possible, do not make adjustments with the
engine running.
• Keep all parts in good working condition and
all hardware tightened.
• Replace all worn or damaged decals.
5