Layout Of Switches On Printed Circuit Board - Daikin VAM 150FJVE Service Manual

Control Functions
1.3

Layout of switches on Printed Circuit Board

1.3.1 Printed Circuit Board
1.3.2 Function of main connection terminal
28
L N
CN7
Outdoor
Thermistor
Indoor
Thermistor
Damper 2
H
M
Damper 1
L
For
KRP50-2
H
M
L N
Power supply
L
Factory setting
Be sure to give
the electric
grounding (earth)
connection.
Terminal No.
Single phase 220 – 240 V 50Hz
Single phase 220 – 220 V 60Hz
Power supply and earth terminal
L N
TeS1
Connection terminal for remote controller for HRV
unit.
This terminal is used to receive information of the
indoor unit for interlocked operation.
P1 P2
This terminal is used to receive information when
centralized controller is connected.
F1 F2
Between terminal no. (J1) ~ (JC)
Used for "fresh up operation" by external input.
Between terminal no. (J2) ~ (JC)
Used for Operation / Stop by external input.
J1 J2 JC
Damper Damper
Primary
CN1 CN2 X3A X4A
Supply Exhaust
air fan air fan
P2 P1 F1 F2 J1 J2 JC
P2 P1 F1 F2 J1
REMOTE CENTRAIZD
CONTROLLER CONTROL
*: VAM1500FJVE and VAM2000FJVE only
Contents of function
Secondary
J2 JC
THE INPUT
FROM OUTSIDE
(HC0110)
3P034928-2B
(HC0043)
Control Functions
SiE00-01