Table of Contents
Advertisement
Fitting the front feet
Note: Dryer is usually supplied with feet fitted and protruding the correct distance.
Tilt the dryer back using a hand trolley and making sure the trolley and dryer are secure.
1
Fit a rubber insert to each plastic foot as shown.
2
Screw the feet into the foot retainers on the left hand and right hand sides as shown.
3
Screw both feet in so they protrude ½" (12 mm) below the bottom of the wall on the foot retainers.
4
Installation instructions
Fig.17 Inserting rubber inserts
Fig.18 Adjusting feet
Fig.19 Final foot position
19
Hide quick links:
Advertisement
Table of Contents
