Table of Contents
Advertisement
CARE AND MAINTENANCE
IMPORTANT: Shut off the main power supply before beginning any maintenance. Do not use
water or a damp cloth to clean the ceiling fan.
blades with a lint-free cloth.
situation. If the fuse blows, unplug the product from the outlet and replace the fuse as below:
1) G rab the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling
on cord.
2) Slide open fuse access cover on top of attachment plug toward blades.
3) R emove the fuse carefully.
4) R eplace fuse.
CAUTION:
5) Slide closed the fuse access cover on top of attachment plug.
CAUTION:
(fuse) that should not be removed. Discard the product if the attachment plug is damaged.
TROUBLESH OOTING
PROBLEM
1. Fan does not
move
2. N oisy operation
3. Excessive
wobbling
POSSIBLE CAUSE
1. Power is off or fuse is blown.
2. Bad wire connection.
1. Blades are loose.
2. Blade is crack ed.
3. N on-approved speed control.
2. Blades are loose.
3. Fan not securely mounted.
4. Fan too close to vaulted ceiling.
CORRECTIVE ACTION
1. Turn power on or check fuse.
2. Turn power off. Loosen canopy,
check all connections.
1. Tighten all blade screws.
2. R eplace blades (call customer
service for special replacement).
3. R eplace with an approved speed
control device.
1. Switch with blade from opposite
side.
2. Tighten all blade screws.
3. Turn off power. Carefully loosen
canopy, and remount securely.
4. Lower or move fan. Extension
downrods may be offered (call
customer service).
8
TM
Hide quick links:
Advertisement
Table of Contents
