Care And Maintenance - Allen + Roth KELLERTON Manual

BLADE BALANCING INSTRUCTIONS
2. Run the fan at high speed (air downfl ow) and observe
wobble. Repeat steps 1 and 2 for each blade (K).
Note which blade (K) has the least wobble. On that
blade (K), install the balancing clip (EE) to the top
edge of the blade (K) near the blade arm (J). Start the
fan and observe wobble. Stop the fan and move the
balancing clip (EE) in small steps toward the end of
the blade (K). At each incremental step, turn on the
fan and observe the wobble. Determine the location of
the balancing clip (EE) that gives the least amount of
wobble.
3. Peel the backing paper from one of the weighted
squares in the balance kit (EE). Secure the weighted
square in the balance kit (EE) fi rmly to the top of the
blade (K), centered at the balancing clip location
and between the edges of the blade (K). Remove
the balancing clip, start the fan and observe. If the
wobble still persists, repeat steps 1 through 3 with
the remaining weighted squares until the wobble
disappears.

CARE AND MAINTENANCE

WARNING: Do not use water when cleaning the ceiling fan. It could damage the motor or the
fi nish and create the possibility of electrical shock.
• When cleaning, use only a soft brush or lint-free cloth to avoid scratching the fi nish.
• Abrasive cleaning agents are not required and should be avoided to prevent damage to the fi nish.
• Periodically check that all hardware is tight and secure.
• Periodic light dusting of the blades is recommended.
• Avoid using water, cleansers, or harsh rags, which can warp and ruin the fi nish.
• Bulb Replacement: Use 100-watt mini can-base bulb. Re-lamp with the appropriate wattage bulb.
Do not exceed the wattage indicated on the bulb socket.
2
3
19
J
Lowes.com/allenandroth
EE
K
EE
K