Guarantee Terms; Maintenance; Cleaning; Storage - Husqvarna 105 Operator's Manual

6 Guarantee terms

Husqvarna AB guarantees this product's functionality for a period of two
years (from date of purchase). The guarantee covers serious faults rela-
ting to materials or manufacturing faults. Within the guarantee period,
we will replace the product or repair it at no charge if the following terms
are met:
• The robotic lawnmower and the charging station may only be used
in compliance with the instructions in this Operator's Manual.
• Users or non-authorised third parties must not attempt to repair the
product.
Examples of faults which are not included in the guarantee:
• Damage caused by water from underneath the robotic lawnmower.
This damage is normally caused by cleaning or irrigation systems
or holes/hollows in the working area when pools of water are for-
med when it rains.
• Damage caused by lightning.
• Damage caused by improper battery storage or battery handling.
• Damage caused by using a battery that is not a Husqvarna AB
original battery.
• Damage caused by not using Husqvarna AB original spare parts
and accessories, such as blades and installation material.
• Damage to the loop wire.
The blades and wheels are seen as disposable and are not covered by
the guarantee.
If a fault occurs with your robotic lawnmower, please contact the dealer
(see Memo on page 2 for further instructions). Please have your receipt
and product serial number available for quicker assistance.

7 Maintenance

7.1 Cleaning

It is important to keep the robotic lawnmower clean. A robotic lawnmo-
wer with a lot of grass stuck to it will find it harder to travel up slopes,
perform worse and be exposed to greater wear and tear. For better ope-
rating reliability and longer service life: check and clean the robotic lawn-
mower regularly and replace worn parts if necessary. It is recommended
to clean using a soft brush.
To reduce the risk of damage to electrical components in the robotic
lawnmower and its charging station, we recommend that all connections
to the charging station are disconnected (power supply, boundary wire
and guide wires) if there is a risk of a thunderstorm.
IMPORTANT INFORMATION
Never use a high-pressure washer or even running water to
clean the robotic lawnmower. Never use solvents for cleaning.

7.2 Storage

Store the robotic lawnmower standing on all wheels or hanging together
with the charging station on the wall bracket specially designed for Auto-
mower® robotic lawnmowers (available for Automower
310/315/420/430X/440/450X)
ENGLISH

7.3 Charging station

Store the charging station and power supply indoors. The boundary loop
and the guide wire can be left in the ground. The ends of the wires
should be protected from damp by connecting them to an original coup-
ler or putting them in a container with grease for instance. If it is not pos-
sible to store the charging station indoors, the charging station must be
connected to the mains, the boundary wire and the guide wires the
entire winter.

7.4 Battery

The battery is maintenance-free, but has a limited service life of 2 to
4 years. Battery service life is dependent on the length of the season
and how many hours a day the robotic lawnmower is used. A long sea-
son or many hours of use per day means that the battery must be repla-
ced more regularly.
Only charge the battery in the included charging station. Incorrect use
may result in electric shock, overheating or leaking of corrosive liquid
from the battery. In the event of leakage of electrolyte flush with water/
neutralizing agent, seek medical help if it comes in contact with the eyes.
For more detailed information on maintenance, please see the complete
Operator's manual on Husqvarna's website.

7.5 Blades

There are three blades on the robotic lawnmower, which are screwed
into the blade disc. All three blades and screws must be replaced at the
same time to obtain a balanced cutting system.
Use Husqvarna AB genuine blades only.
To replace the blades:
1. Set the main switch to position 0.
2. Wear protective gloves.
3. Turn the robotic lawnmower upside down.
4. Rotate the skid plate so that its holes align with the screw for the
blade.
5. Remove the screw. Use a straight slot or cross-tip screwdriver.
6. Remove the blade and the screw.
®
7. Screw on the new blade and the new screw. Check that the blades
can pivot freely.
WARNING
Use only original batteries recommended by the
manufacturer. Product safety cannot be guaran-
teed with other than original batteries.
Do not use non-rechargeable batteries
WARNING
Always use original Husqvarna blades and screws
when replacing. Only replacing the blades and reu-
sing the screw can result in a screw wearing
during mowing and shearing. The blades can then
be propelled from under the body and cause seri-
ous injury.
English - 63