Table of Contents
Advertisement
AXIS Q1635-E Fixed Network Camera
Video and Audio
Video and Audio
The video and audio settings can be used to optimize video and audio quality. You can configure the following:
•
Video stream settings. See page 22.
•
Stream profiles. See page 24.
•
ONVIF Media Profiles. See page 24.
•
Camera settings. See page 25.
•
View areas. See page 28.
•
Overlay image. See page 28.
•
Privacy mask. See page 30.
•
Focus. See page 30.
•
Audio settings. See page 31.
•
Audio clips. See page 33.
Set Up Video Streams
To set up the product's video streams, go to Video & Audio > Video Stream.
The video stream settings are divided into the following tabs:
•
Image. See page 22.
•
Audio. See page 31.
•
H.264. See page 23.
•
MJPEG. See page 24.
Pixel Counter
The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is
a specific size requirement, for example in face recognition.
The pixel counter can be used:
•
When setting up a video stream, see Set Up Video Streams on page 22. Under Preview, click Open and select the Show
pixel counter option to enable the rectangle in the image. Use the mouse to move and resize the rectangle, or enter the
number of pixels in the Width and Heioht fields and click Apply.
•
When setting focus, see Focis on page 30. Select the Show pixel counter option to enable the rectangle in the image. Use
the mouse to move and resize the rectangle, or enter the number of pixels in the Width and Heioht fields and click Apply.
Image
The default image settings can be configured under Video & Audio > Video Stream. Select the Imaoe tab.
The following settings are available:
•
Resolution. Select the default resolution.
•
Compression. The compression level affects the image quality, bandwidth and file size of saved images; the lower the
compression, the higher the image quality with higher bandwidth requirements and larger file sizes.
22
Advertisement
Table of Contents
