Axis Q1635 Installation Manual
Hide thumbs
Also See for Q1635:
- Installation manual (25 pages) ,
- User manual (72 pages) ,
- User manual (79 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Axis Q1635
Summary of Contents for Axis Q1635
- Page 1 AXIS Q1635 Network Camera Installation Guide...
- Page 2 Every care has been taken in the preparation of this • Restrictions of Hazardous Substances (RoHS) Directive document. Please inform your local Axis office of any 2011/65/EU. See Disposal and recycling on page 3 . inaccuracies or omissions. Axis Communications AB cannot...
- Page 3 Should you require any technical assistance, please contact contact your local authority responsible for waste disposal. your Axis reseller. If your questions cannot be answered In accordance with local legislation, penalties may be immediately, your reseller will forward your queries through...
- Page 4 • find answers to resolved problems in the FAQ database. Search by product, category, or phrase • report problems to Axis support staff by logging in to your private support area • chat with Axis support staff •...
-
Page 5: Package Contents
AXIS Q1635 Network Camera Package contents • AXIS Q1635 Network Camera • 2–pin connector block for power input • 4–pin I/O connector block for connecting external devices • 2–pin RS485/422 connector block (x2) • Camera stand • Allen key Resistorx® T20 •... -
Page 6: Product Overview
AXIS Q1635 Network Camera Product overview Status LED indicator Focus ring Lock screw for focus ring Zoom puller... - Page 7 14. microSD Card slot 15. Audio in 16. Audio out Important If the Axis product is installed in an external camera housing, leave an unobstructed cylinder-shaped zone with Ø85 mm (3 3/8 in) around the lens to enable lens movements within the housing.
-
Page 8: How To Install The Product
To unmount, go to Setup > System Options > Storage > SD Card and click Unmount. How to access the product AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products on the network and assigning them IP addresses in Windows®. Both applications are free and can be downloaded from www.axis.com/support... -
Page 9: How To Adjust Focus And Zoom
AXIS Q1635 Network Camera How to adjust focus and zoom 1. Open the product’s home page and go to Setup > Basic Setup > Focus. 2. Under the Basic tab, click Open iris. If the button is inactive the iris is already open. -
Page 10: How To Replace The Lens
In order to set the focus and position the lens, the product must be connected to the network. It is possible to use optional lenses for the Axis product. To replace the lens: 1. - Page 11 3. Select the installed iris lens from the drop-down list and click OK. To change the iris configuration for P-Iris lenses not listed in the drop-down list: 1. Download the iris configuration file from www.axis.com 2. Go to Setup > Video and Audio > Camera Settings. Iris configuration shows the current configured iris type.
-
Page 12: How To Reset To Factory Default Settings
AXIS Q1635 Network Camera How to reset to factory default settings Important Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to the factory default values. To reset the product to the factory default settings: 1. -
Page 13: Further Information
AXIS Q1635 Network Camera Further information • For the latest version of this document, see www.axis.com • The user manual is available at www.axis.com • To check if there is updated firmware available for your product, see www.axis.com/support • For useful online trainings and webinars, see www.axis.com/academy... -
Page 14: Specifications
AXIS Q1635 Network Camera Specifications LED Indicators Note • The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information. -
Page 15: Sd Card Slot
AXIS Q1635 Network Camera Status LED behavior for focus assistant The status LED flashes when the Focus Assistant is active. Color Indication The image is out of focus. Adjust the lens. Amber The image is close to focus. The lens needs fine tuning. - Page 16 • Resetting the product to factory default settings. See page 12. • Connecting to an AXIS Video Hosting System service or AXIS Internet Dynamic DNS Service. For more information about these services, see www.axis.com. Function button The function button has multiple functions: •...
-
Page 17: About I/O Connectors
AXIS Q1635 Network Camera • Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal. • Audio out (green) – 3.5 mm output for audio (line level) that can be connected to a public address (PA) system or an active speaker with a built-in amplifier. A stereo connector must be used for audio out. - Page 18 AXIS Q1635 Network Camera 3– Configurable Digital input – Connect to pin 1 to activate, or 0 to max 30 V DC (Input or leave floating (unconnected) to deactivate. Output) Digital output – Connected to pin 1 when 0 to max 30 V DC,...
-
Page 19: Power Connector
RX pair for all modes (combined RX/TX for 2-wire RS485) RS485/422 RX(B) RS485A alt RS485/422 RX(A) TX pair for RS422 and 4-wire RS485 RS485/RS422 TX(B) RS485/RS422 TX(A) Important The recommended maximum cable length is 30 m (98 ft). Operating Conditions The Axis product is intended for indoor use. - Page 20 AXIS Q1635 Network Camera Product Temperature Humidity AXIS Q1635 0 °C to 55 °C 10-85% RH (non-condensing) (32 °F to 131 °F)
-
Page 21: Safety Information
AXIS Q1635 Network Camera Safety information Hazard levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. -
Page 22: Safety Instructions
Battery The Axis product uses a 3.0 V CR2032 lithium battery as the power supply for its internal real-time clock (RTC). Under normal conditions this battery will last for a minimum of five years. Low battery power affects the operation of the RTC, causing it to reset at every power-up. When the battery needs replacing, a log message will appear in the product’s server report. - Page 23 WARNING • Risk of explosion if the battery is incorrectly replaced. • Replace only with an identical battery or a battery which is recommended by Axis. • Dispose of used batteries according to local regulations or the battery manufacturer's instructions.
- Page 24 Installation Guide Ver. M4.2 AXIS Q1635 Network Camera Date: March 2017 © Axis Communications AB, 2014 - 2017 Part No. 1731629...
Need help?
Do you have a question about the Q1635 and is the answer not in the manual?
Questions and answers