Replacing The Mda Module - Lenovo RackSwitch G8332 Installation Manual

Replacing the MDA module

60
RackSwitch G8332 Installation Guide
3. Gently pull the MDA lock handle to unlock the MDA module from the G8332
chassis, and slide the module out of the MDA slot.
MDA Lock Handle
(Pull to unlock)
To replace the MDA module, complete the following steps.
1. Pull the MDA lock handle in the open position, and slide the module into the
MDA slot on front panel of the G8332.
MDA Lock Handle
(Pull to install, push to lock)
2. Push the lock handle to secure the module in place.
3. Log into the switch.
4. To turn on the power to the MDA module, execute the following commands:
RS G8332> enable
RS G8332# no mda shutdown