Removing The G8332 From A Lenovo System X Or Power Rack - Lenovo RackSwitch G8332 Installation Manual

Removing the G8332 from a Lenovo System x or Power Rack

62
RackSwitch G8332 Installation Guide
This section describes how to remove the G8332 from a Lenovo System x or Power
4-post rack, such as the Lenovo e1350.
To remove the G8332 from a System x or Power rack, complete the following steps:
1. Disconnect all external cables.
2. If the 1U air duct option has been installed, remove it as described in
"Removing the 1U Air Duct Option" on page
3. Loosen and remove M3.5 screws that secure the rear brackets to the front
brackets.
4. Loosen and remove M6 washers, screws, and clip nuts that attach the filler
plate to the rear mounting brackets.
67.
10 11
8
4
2
9
3
6