Installing The G8332 In A Lenovo System X Or Power Rack - Lenovo RackSwitch G8332 Installation Manual

Installing the G8332 in a Lenovo System x or Power Rack

© Copyright 2015 Lenovo
7. Initialize the switch. See
8. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
This section describes how to install the G8332 in a Lenovo System x
4-post rack, such as the Lenovo e1350, using the Lenovo Adjustable 19" 4-Post Rail
Kit.
The kit must be purchased separately. It includes the following parts:
Table 10. Lenovo Adjustable 19" 4-Post Rail Kit parts
Item number Description
RID label
1
M6 locking washers
2
M3.5 screws
3
M6 screws
4
M6 clip nuts
5
M6 cage nuts
6
M4 screws
7
Filler plate
8
Switch front bracket
9
Rear mounting bracket
10
Rear mounting bracket with cord exit
11
Statement 26
CAUTION:
Do not place any object on top of rack-mounted devices.
Chapter 5, "Initializing the
68).
Chapter 3: Installing G8332 Hardware and Options
G8332," on page 71.
"Configuring Vital
®
or Power
Quantity
1
8
4
8
8
8
16
1
2
1
1
37