Removing The G8332 From A Lenovo Idataplex Rack - Lenovo RackSwitch G8332 Installation Manual

Hide thumbs Also See for RackSwitch G8332:
Table of Contents

Advertisement

Removing the G8332 from a Lenovo iDataPlex Rack

© Copyright 2015 Lenovo
This section describes how to remove the G8332 from a Lenovo iDataPlex rack.
To remove the G8332 from an iDataPlex rack, complete the following steps:
1. Disconnect all external cables.
2. If the 1U air duct option has been installed, remove it as described in
"Removing the 1U Air Duct Option" on page
3. Loosen and remove the M6 washers, screws, and clip nuts that attach the
alignment plate.
3
4. Loosen and remove the M6 washers and screws that mount the switch into the
rack.
3
5. Slide the switch out of the rack.
4
2
4
2
Chapter 4: Removing and Replacing G8332 Components
67.
8
10
65

Advertisement

Table of Contents
loading

Table of Contents