Lenovo RackSwitch G8332 Installation Manual page 40

40
RackSwitch G8332 Installation Guide
6. Use M6 washers, screws, and clip nuts to attach the filler plate to the rear
mounting brackets. Torque the screws to approximately 5.7 Nm ± 0.1 Nm (50
inch-pounds).
7. Use M3.5 screws to secure the rear brackets to the front brackets. Torque the
screws to approximately 0.5 Nm (4 inch-pounds).
8. If installing the 1U air duct option, see the instruction on
9. Connect all external cables in accordance with the
page 34.
10. Initialize the switch. See
11. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
8
4
2
10 11
Chapter 5, "Initializing the
68).
6
9
3
page 44.
"Cabling Guidelines" on
G8332," on page 71.
"Configuring Vital