Advertisement
Check your package
Check the package and make sure you have everything:
Contents
(1) DSK Transmitter & Receiver
(2) +5V DC Power supply x 1pc
(3) User's Guide
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without
further notice to a product described herein to improve reliability,
design, packaging or function.
Installation
Installation Steps:
1. Connect the Transmitter module to the DVI source device.
2. Connect the Receiver module to the display.
3. Connect a single strands of multi-mode SC terminated
fiber optic cable(50/125㎛) from the Transmitter to the Receiver
module.
4. Connect the included +5V DC power supply into Receiver module.
5. Green LED indicator on the modules will be light up
after all connections are completed.
SC type optical port
NOTE: The Transmitter module does not need to be externally
powered unless the source device does not supply enough power
through the DVI connector.
User's Guide
LED indicator
DC +5V Power jack
Advertisement
