Check Your Package - Ophit OMP-DP User Manual

Check your package

Check the package and make sure you have everything: Check the package and make sure you have everything:
Contents Contents
(1) OMP-DP Transmitter & Receiver (1) OMP-DP Transmitter & Receiver
(2) +5V DC Power supply x 1ea (2) +5V DC Power supply x 1ea
(3) User's Guide (3) User's Guide
If any of these items are missing in your package, contact OPHIT or If any of these items are missing in your package, contact OPHIT or
your supplier for support. your supplier for support.
NOTE: Package content may differ if you have placed a special order or
placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without further notice
to a product described herein to improve reliability, design, packaging or
function.
Installation
Installation steps: Installation steps:
1. 1. Connect the transmitter module to the DisplayPort source Connect the transmitter module to the DisplayPort source
device. device.
2. 2. Connect the receiver module to the display Connect the receiver module to the display
3. 3. Connect the MPO/MTP optical cable(8 ch or 12 ch) from Connect the MPO/MTP optical cable(8 ch or 12 ch) from
transmitter to the receiver transmitter to the receiver
4. 4. Connect the included +5V DC power supply into the receiver Connect the included +5V DC power supply into the receiver
5. 5. Green LED indicator on the modules will be light up after all Green LED indicator on the modules will be light up after all
connections are completed connections are completed
DC +5V
Power jack (RX)
User's Guide
Power LED
indicator
MPO/MTP
Connector
DC Power Jack is blocked (TX)
※OMP-DP TX doesn't need external
power supply.