Advertisement
Check your package
Check the package and make sure you have everything:
Contents
(1) DQSP Transmitter & Receiver
(2) +5V DC Power supply x 2pc
(3) User's Guide
If any of these items are missing in your package, contact OPHIT or
your supplier for support.
NOTE: Package content may differ if you have placed a special
order or placed order from anywhere other than OPHIT CO., LTD.
OPHIT CO., LTD. reserves the right to make changes without
further notice to a product described herein to improve reliability,
design, packaging or function.
Installation
Installation Steps:
1. Connect the Transmitter module to the DVI source device.
2. Connect the Receiver module to the display.
3. Connect two strands of multi-mode SC terminated
fiber optic cable(50/125㎛) from the Transmitter to the Receiver
module.
Each fiber optic port is identified by the letter A or B.
Make sure that the fiber optic cables between the Transmitter and
Receiver are connected to the proper port.
User's Guide
Advertisement
