Cabinet Information (With Fl Ush Mount Trim) - Viking 5 Series Installation Manual

Cabinet Information
Flush Mount Installation with Standard Cabinets
1/8"
(0.3 cm)
23-7/8"
(60.6 cm)
24-5/8"
(62.5 cm)
*The face of the door skin needs to be on the same plane, flush with the cabinets.
If the door face is pushed in past the surface of the cabinet, the door could run into
cabinetry when it is in the full open position.
The hinge stop needs to be placed at 90 or 110 degrees.
Flush Mount Installation with Custom Cabinets
1/8"
(0.3 cm)
23-7/8"
(60.6 cm)
24-5/8"
(62.5 cm)
Face of
stainless steel door
*The face of the door skin needs to be on the same plane, flush with the cabinets.
If the door face is pushed in past the surface of the cabinet, the door could run into
cabinetry when it is in the full open position.
The hinge stop needs to be placed at 90 or 110 degrees.
16
( with Flush Mount Trim)
Offset in Finished Wall
1-5/8"
(4.1 cm)
24"
26-3/8"
(61.0 cm)
(67.0 cm)
26-1/4"
(66.7 cm)
Flush
Side trim
*
25-5/8"
26-3/8"
(65.1 cm)
(67.0 cm)
26-1/4"
(66.7 cm)
Flush
Side trim
1/2" (1.3 cm)
*
Finished
Wall
24-3/4"
(62.9 cm)
Face of
cabinet
frame
3/4"
(.6 cm)
Face of
door/drawer
Finished
Wall
26-3/8"
(67.0 cm)
Face of
cabinet
frame
3/4"
(.6 cm)
Face of
door/drawer