Maintenance - Goddess RSB 085 GW8 Instruction Manual

ENg
FREEzER ROOM DOOR REVERSE
before Door reverse
1) - Unscrew the two plastic screws (1) on the left side with screwdriver.
2) - Take off the two screws caps (2) on the door handle bracket (3) and uninstall the door
handle bracket (3).
3) - Unscrew the freezer room door (4) on the right side and take it off. Then reverse it
and install it to the left side by using the same screws.
4) - Reverse the door handle bracket (3) and install it onto the right side and put
on the 2 screws caps (2).
5) - Install the two plastic screws (1) onto the right side with screwdriver.

5. MAINTENANCE

CLEAN ThE OUTSIDE USINg A SOFT CLOTh
Prolonged disuse
1) Empty the refrigerator.
2) Disconnect the appliance from the power supply.
3) Defrost and clean the interior.
4) In the event of prolonged disuse, leave the door open to prevent the formation of mould,
5) odours and oxidation.
6) Clean the appliance.
- Clean the inside of the low temperature compartment (where fitted) when defrosting.
- Periodically clean the inside of the refrigerator compartment with a sponge dampened
in warm water and/or neutral detergent. Rinse and dry with a soft cloth.
- Do not use abrasive products.Do not use abrasive products, scourers, stain-removers
e.g. acetone, trichloroethylene) or vinegar.
After Door reverse
ENG - 22