Advertisement
PRODUCT DESCRIPTION
PRODUCT DESCRIPTION
Product Summary
The Flextec™ 500 is a multi-process CC/CV DC inverter power source
rated for 450 Amps, 38 Volts at 100% duty cycle. The Flextec™ 500
comes in a rugged case and is intended for either indoor or outdoor
operation and comes with an IP23 environmental rating. Transporting
the Flextec™ 500 is made simple through lifting handles. The user
interface of the Flextec™ 500 is simple and intuitive. Weld modes are
selected via a 5 position selector switch. Volts and Amps are
displayed on an easy to view LED display, and the amps and volts are
set via a large output control knob. A hot start and an arc control knob
allow for finer tuning of the welding arc for the application. The
Flextec™ 500 is designed for the North America and Export markets
and operates on 380V, 460V, or 575V 50hz or 60hz three phase
power. Switching between voltages is made simple via a reconnect
panel located on the case back.
The Flextec™ 500 is designed to be compatible with the current
range of semi-automatic ArcLink wire feeders in addition to analog
and across-the-arc wire feeders. The Flextec™ 500 comes with a 5-
pin amphenol, a 12-pin amphenol, and a 14-pin amphenol standard.
Voltage sensing is either done at the studs or via a 67 lead when
operating with an ArcLink wire feeder.
The Flextec™ 500 machine is factory pre-programmed with multiple
welding procedures, typically including GMAW, FCAW, SMAW, CAG,
and GTAW for a variety of materials, including mild steel, stainless
steel and aluminum. The Flextec™ 500 comes standard with the 4
basic process modes which are accessible via the machine case front
controls. The ArcLink mode position and ArcLink feeders unlock
synergic mode capabilities.
9
Advertisement
