Maintenance And Troubleshooting - Pro-Form 440 R User Manual

3. Begin rowing and follow your progress with the
display.
As you exercise, the console will display the mode
that you select.
To reset the display to zero, press and hold the
Mode button for several seconds.

MAINTENANCE AND TROUBLESHOOTING

MAINTENANCE
Inspect and tighten all parts of the rower regularly.
Replace any worn parts immediately.
To clean the rower, use a damp cloth and a small
amount of mild detergent. IMPORTANT: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
CONSOLE TROUBLESHOOTING
Most console problems are the result of low batteries;
for replacement instructions, see assembly step 15 on
page 12.
If the rower will not be used for an extended period of
time, remove the batteries from the console.
HOW TO GREASE THE PEDAL AXLE
If the pedals squeak when you use the rower, see
assembly step 12 on page 11. Remove the Right
and Left Pedals (30, 57), and apply a small amount
of the included grease to both sides of the Pedal Axle
(58). Then, reattach the Pedals.
4. When you are finished exercising, the console
will turn off automatically.
If the row bar does not move for a few seconds, the
console will pause.
The console has an auto-off feature. If the row bar
does not move and the Mode button is not pressed
for a few minutes, the power will turn off automati-
cally to save the batteries.
HOW TO GREASE THE ROLLERS
If the rollers (A) beneath the seat (B) squeak when you
use the rower, apply a small amount of the included
grease to a paper towel, and spread a thin layer evenly
along the rail (C) where the rollers move. Then, wipe
off any excess grease.
15
B
C
Grease
A