Table of Contents
Advertisement
14
www.aeg.com
8. Touch a sensor field or open the
oven door to stop the acoustic
signal.
9. Turn off the appliance.
When the Time delay
function is activated, the
display shows a static
symbol of the oven function,
dot shows which clock
function is on in the Clock /
residual heat display.
7.6 Setting the SET+GO
You can use the SET+GO function only
when the DURATION is set.
1. Set an oven function (or a
programme) and temperature.
2. Set the DURATION.
3. Touch
flashes in the display.
4. Touch
function.
The display shows
indicator. This indicator shows which
clock function is activated.
5. Touch a sensor field (apart from ON /
OFF) to start the SET+GO function.
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to Safety chapters.
There are 20 automatic programmes.
Use an automatic programme or recipe
8.1 Automatic programmes
Programme number
1
2
3
4
5
6
with a dot and
. The
again and again until
to set the SET+GO
and
with an
Programme name
BRAISED MEAT
ROAST PORK
ROAST VEAL
ROAST LAMB
ROAST GAME
CHICKEN, WHOLE
7.7 Setting the MINUTE
MINDER
1. Touch
.
and "00" flash in the display.
2. Use
to switch between options.
First you set the seconds, then the
minutes and the hours.
3. Use
or
to set the MINUTE
MINDER and
4. Touch
or the MINUTE MINDER
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes and 00:00
and
flash in the display.
5. Touch a sensor field or open the
oven door to stop the acoustic
signal.
7.8 COUNT UP TIMER
1. To reset the Count Up Timer, touch
again and again until
the display.
2. Touch
until the display shows
"00:00" and the Count Up Timer
starts to count up again.
when you do not have the knowledge or
experience on how to prepare a dish.
The display shows the default cooking
times for all automatic programmes.
to confirm.
flashes in
Advertisement
Table of Contents
