Using The Accessories - AEG BP7314021M User Manual

16 www.aeg.com
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Deactivate the appliance.
8.5 Automatic programmes
with the core temperature
sensor (selected models)
The core temperature of the food is
default and fixed in programmes with the
core temperature sensor. The
programme ends when the appliance is
at the set core temperature.
1. Activate the appliance.
2. Touch
display shows

9. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
9.1 Core temperature sensor
There are two temperatures to be set:
the oven temperature and the core
temperature.
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
CAUTION!
Only use the core
temperature sensor supplied
or the correct replacement
parts.
The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Activate the appliance.
2. Put the point of the core temperature
sensor (with
the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket at the front of
the appliance.
again and again until the
.
on the handle) into
3. Install the core temperature sensor.
Refer to "Core temperature sensor".
4. Touch
or
programme for the core temperature
sensor.
The display shows the cooking time,
and .
5. Touch or the settings save
automatically after five seconds.
When the set time ends, an acoustic
signal sounds for two minutes.
flashes.
6. Touch a sensor field or open the
door to stop the acoustic signal.
7. Deactivate the appliance.
The display shows
default set core temperature. The
temperature is 60 °C for the first
operation, and the last set value for each
subsequent operation.
When you put the core
temperature sensor into the
socket, you cancel the
settings for the clock
functions.
4. Touch or
temperature.
5. Touch or the settings save
automatically after 5 seconds.
to set the
flashing and the
to set the core