Table of Contents
Advertisement
Removal steps
Note: After installing a new coin-cell battery, reset the system date and time in the UEFI BIOS menu.
PCI-Express card, PCI-Express card holder, PCI-Express card bracket
and side system fan
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
The PCI-Express card might be very hot. Before you open the computer cover, turn off the computer and
wait several minutes until the computer is cool.
For access, do the following:
1. Remove the power cord. See "Power cord" on page 14.
2. Remove the computer cover. See "Computer cover" on page 14.
3. Remove the side system fan cable (if any) from the system board.
Removal steps
• Type 1
.
Chapter 4
CRU replacement
21
Advertisement
Table of Contents
