NEVER use solvents or oil-based cleaners to clean the O-Box WM. Ÿ Use mild detergents only. Wipe surfaces with a damp, lint-free cloth. ALWAYS use genuine OConnor parts and accessories with the O-Box WM. Ÿ When using the O-Box WM as a clamp-on mattebox and/or handheld mount, Ÿ...
Page 5
New accessories Oconnor have teamed up with our friends at CINEPARTS to introduce two unique Universal Rings for the O-Box WM range. Based on an exclusive CINEPARTS design endorsed by OConnor, each ring is manufactured from aircraft aluminum and holds a seamless high-tech fabric inner that will flex over a variety of lens diameters.
Specifications O-Box WM Set (C1243-0001) / O-Box WM Deluxe Set (C1243-0002) O-Box WM Weight (incl. top flag bracket, LWS rod bracket) ....0.7 kg (1.54 lbs) Dimensions (HWD) .
Page 7
Specifications O-Box WM Deluxe Set (C1243-0002) Only Side flags (set of 2) Dimensions (width at widest point) ..... 115 x 172 mm (4.5 x 6.7 in.) Side flag brackets (set of 2) Dimensions (HWD) .
In the box - deluxe set O-Box WM Deluxe Set Filter Frames 4"x 4" Set of 2 C1243-0002 Filter Frames 4"x 5.65" Set of 2 Side Flags (Wings) Set of 2 Side Flag Brackets O-Box Wide Mini Set of 2...
Page 10
In the box - deluxe set Universal Rings Bellows Ring Reduction Ring Set of 2 (Donut) (114 to 110 mm) Top or Bottom Flag...
Accessories Clamp Rings C1243-1123 C1243-1124 C1243-1125 C1243-1126 Studio Adapters C1243-1118 (19 mm) C1243-1119 (15 mm) (for use with rod bridge) Clamp Ring size Part no. (for standard lenses) Side Flag Brackets Set of 2 C1243-1123 150 to 114 mm C1243-1121 C1243-1124 150 to 110 mm C1243-1125...
Page 12
Bellows Ring (Donut) C1243-2171 C1243-1117 C1243-2172 C1243-2173 O-Grips 3-System Rod Bridge Reduction Ring size Matching OConnor accessories: Part no. C1244-1002 (for use with bellows ring) Cine Follow Focus CFF-1 Set C1241-0001 C1243-2171 114 to 110 mm O-Grips Handgrip System C1243-2172...
Page 13
Accessories Universal Rings C1243-1128 C1243-1129 Top or Bottom Flag C1243-2149 Universal Ring size Part no. (for standard lenses) C1243-1128 150 to 80 mm Universal Ring size Part no. (for use with bellows ring) C1243-1129 114 to 55 mm...
Components knurled flag screws lock lever (hollow) top or bottom bracket top or bottom flag (with utility bar or “cheese stick”) filter stages (front / rear) sunshade (mattebox) side flag (asymmetric) bellows ring or “donut” (optional) flag axle side flag bracket fixing screw O-Grip (for rotatable stage)
Assembly – assembling the filter frames Push up the filter spring. Align the Slide the assembled filter frame into the filter stage. filter in the frame, then release the Two filter stages are available between the sunshade spring to fix the filter in place. and the rear clamping interface: one fixed and one rotatable stage.
assembling the flags If required, turn the lock lever anti-clockwise to unlock the flag axle. Adjust the axle so the hollow knurled screws point upward. Turn the knurled screws anti-clockwise a few turns to slacken. Align the cutouts at the bottom of the flag with the screw threads, then push the flag into position and tighten the screws.
(see page 8). For more information about lens diameters visit OConnor Labs online at the OConnor website (see OConnor > Labs > ‘Lens Diameters’). Choose a clamp ring to suit your camera lens. Turn the knurled screw anti-clockwise to widen the rear clamping interface.
This type of setup is used when the LWS rod bracket is mounted to the mattebox. For more information about lens diameters visit OConnor Labs online at the OConnor website (see OConnor > Labs > ‘Lens Diameters’). Turn the knurled screw anti-clockwise to widen the rear clamping interface. Carefully fit the universal ring into the clamping interface.
assembling the bellows ring (donut) The O-Box WM can be fitted with an optional bellows ring or “donut” and a reduction ring or universal ring for use with camera lenses with smaller lens diameters (see page 12 and 13). The donut can accommodate an optional rotatable round filter (Ø138 mm).
Turning the lock levers clockwise secures the mattebox on the rods. For more information about rod adapters visit OConnor Labs online at the OConnor website (see OConnor > Labs > ‘Rod Standards Explained’). Remove the LWS bracket (see page 19).
Cine Follow Focus For precision movement control the O-Box WM can be partnered with the Cine Follow Focus.
Page 22
LWS rod bracket The O-Box WM mattebox can be attached to a camera fitted with an OConnor Follow Focus with the camera rods mounted above or below the camera lens. The complete O-Box WM mattebox assembly, including a suitable lens adapter, is then mounted flush on camera rods using the 15 mm LWS rod bracket.
The standard setup with a 15 mm LWS rod bracket offers four mounting points for O-Grips (B). For more information consult the OConnor O-Grips Handgrip System User Guide (publication part no. C1244-4980) supplied with the product or visit the OConnor website (see page 19).
Page 24
OConnor Offices worldwide ASIA EUROPE HEADQUARTERS CHINA FRANCE 2701 N. Ontario St. Room 706, Tower B 171 Avenue des Gr sillons é Burbank, CA 91504 Derun Building 92635 Gennevilliers CEDEX YongAn Dongli A No. 8 France Tel.: +1 818 847 8666 Jianwai Ave.