Starting A Programme - CDA WC141 Installation, Use And Maintenance Manual

Integrated dishwasher
Table of Contents

Advertisement

As the delay timer counts down, the "Delay Timer Indicator" lights will
illuminate in turn, so at six hours delay the "6h" light will illuminate, and
at three hours delay the "3h" light will illuminate.
Salt Warning Light
When the dishwasher salt begins to run out, the "Salt Warning" light
will illuminate to advise that the salt needs refilling.
Rinse Aid Warning Light
When the rinse aid begins to run out, the "Rinse Aid Warning" light will
illuminate to advise that the rinse aid needs refilling.
End of Programme Light
When the programme is complete, the dishwasher will emit five beeps
and the "End of Programme" light will illuminate.

Starting a Programme

Press the Power button.
Press the "Programme Selection" button until the required
"Programme" light is illuminated.
If required, press the "Delay Timer" button.
Once the power is switched on, the "End of Programme Indicator"
light will switch on.
Once a programme is selected, the "End of Programme Indicator"
light will switch off, and the "Programme Indicator" light will switch
on.
When you close the dishwasher door the programme will start
automatically.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents