Connecting To The Tv-Hub Using Its Built-In Wi-Fi - KVH Industries TracVision TV1 User Manual

TracVision TV1 User's Guide
Network Settings

Connecting to the TV-Hub Using its Built-in Wi-Fi

20
You can connect any Wi-Fi enabled mobile device (such as a
smartphone, tablet, or laptop) to the TV-Hub via its built-in wireless
access point (WAP). The wireless range will depend on the layout and
structure of the vessel. For example, wireless signals degrade when
passing through bulkheads, water, and near metal masses.
Figure 3-3 TV-Hub Wi-Fi Connection (TV-Hub A shown)
NOTE: This direct wireless connection will not work if you changed the
TV-Hub's wireless settings from Access Point mode to Infrastructure.
To access the TV-Hub's web interface via Wi-Fi, follow these steps:
1. Select the TVHub-<TV-Hub serial number> network from
your device's Wi-Fi settings to connect to the TV-Hub.
2. Start your web browser and enter http://tvhub.kvh. (If the web
interface does not appear, try entering http://172.16.0.1, which
is the default IP address of the TV-Hub.)