Rear Wheel Inspection; Rear Brake - Eton beamer R2-50 Service Manual

9.4 REAR WHEEL INSPECTION

Measure the rear wheel rim for distortion.
Replace rim if the distortion is over 2.0 mm in difference.

9.5 REAR BRAKE

REAR BRAKE DRUM INSPECTION
Measure the rear brake drum inner diameter.
Replace if the diameter is over 110.5mm.
BRAKE LINING INSPECTION
Measure the brake lining thickness.
Replace if it is less than 3.0 mm.
Standard thickness: 4.0mm
Service limit: 3.0mm
Note: Do not allow grease to come into contact with
the lining surface
Beamer R2 Rev 1.0 Page 42 of 56 6/13/2007