High-Low Beam Controller - Eton beamer R2-50 Service Manual

2.13 HIGH-LOW BEAM CONTROLLER

This controller is located beside right handle bar and
controls the headlight intensity setting.
When the switch is placed in the full right position, the
headlights are set to illuminate at 100% intensity. In the
center position the headlight will illuminate at 60%
intensity. Placed in the far left position, the headlights
will be off.
NOTE: It is recommended that you have the headlight
on at all times when operating the vehicle to improve
your visibility to other traffic.
Beamer R2 Rev 1.0 Page 13 of 56 6/13/2007