Transmission Power Path - Eton beamer R2-50 Service Manual

7.3 TRANSMISSION POWER PATH

The crankshaft torque drives the front pulley.
The torque (drive) pulley turns the belt.
The belt drives the rear (driven) pulley.
The force is transmitted through the clutch shoe, clutch housing, and drive shaft.
The drive shaft turns the idle gear in gearbox.
Turning speed is reduced by the final-gear and transmitted to the rear-axle shaft to move rear
wheel.
Beamer R2 Rev 1.0 Page 30 of 56 6/13/2007