Carburetor - Eton beamer R2-50 Service Manual

4.2 CARBURETOR

Carburetor
REMOVAL
Remove the air cleaner.
Disconnect the fuel line and auto-choke electric wire.
Unscrew the intake pipe mounting bolts at the
carburetor, and then remove the carburetor.
Note: Before removing carburetor, you must shut the
fuel flow off.
Air Cleaner
Remove the carburetor cap.
Remove the throttle cable from the throttle valve
while depressing the throttle valve spring.
Remove the needle clip retainer, the jet needle, and
needle clip. Inspect the throttle valve and jet needle
surface for wear, scratches, or dirt.
Beamer R2 Rev 1.0 Page 18 of 56 6/13/2007