Sangean WFR-29D Manual page 65

Setting the alarm clock - cont.
. Rotate the Tuning Control Rotary to highlight 'Enable' and press the Tuning Control Rotary.
The display will show the Frequency options for the alarm. The alarm frequency options are as
follows:
'Off' - the alarm will be disabled
'Daily' - the alarm will sound everyday
'Once' - the alarm will sound once
'Weekends' - the alarm will sound only at weekends
'Weekdays' - the alarm will sound on weekdays only
Rotate the Tuning Control Rotary to choose the required alarm frequency option. Choosing
Off will disable the alarm. Press the Tuning Control Rotary to confirm the selection. If you
choose to set the alarm to Once you will also need to set the date using the Tuning Control
Rotary.
8. The alarm can be set to buzzer, Internet radio, DAB radio, FM radio. For whichever radio mode
is selected, the radio alarm may be set to any of the stations which have been stored as presets
or to the station most recently listened to. Rotate the Tuning Control Rotary to highlight the
current 'Mode' option for the alarm, then press the Tuning Control Rotary if you wish to change
it. Rotate the Tuning Control Rotary to highlight either 'Buzzer' or the required mode. Press the
Tuning Control Rotary to confirm the selection.
9. If setting the alarm to a radio option, rotate the Tuning Control Rotary to highlight the 'Preset:'
option then press the Tuning Control Rotary if you wish to change it. Choose from either the
radio station 'Last listened' to, or from the presets 1 - 5. Scroll to the chosen option and press
the Tuning Control Rotary to confirm the selection. Note that you can only set the alarm to
use a preset which has already been stored.
7-9
GB
64