Manually Setting The Clock - Sangean WFR-29D Manual

Manually setting the clock

The WFR-29D radio will normally set its clock automatically to UK time after a connection to the
Internet has been established. Should you need to set the time manually, change the time zone,
or manually switch from winter to summer time (GMT to BST - also known outside the UK as
daylight savings time), then please follow this procedure.
. Press the Standby button to switch on your radio.
2. To set all time settings press the Menu button to access the menu for the current mode.
3. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press the
Tuning Control Rotary to enter the system settings menu.
4. To change the time zone setting go to step 11. To change from winter to summer time go to
step 13. To change the current time or date setting rotate the Tuning Control Rotary until
'Time/Date' is highlighted on the display, then press the Tuning Control Rotary to enter the
time and date setting screen.
. Rotate the Tuning Control Rotary until 'Set Time/Date' is highlighted on the display. Press
the Tuning Control Rotary to enter the clock setup. The day digits will flash.
6. Rotate the Tuning Control Rotary until the correct day is shown on the display. Press the
Tuning Control Rotary to enter the selection. The month digits will then flash.
7. Rotate the Tuning Control Rotary to select the correct month. Press the Tuning Control
Rotary. The year digits will then flash.
61
1
2
3-7