Finding New Dab Radio Stations - Sangean WFR-29D Manual

Finding new DAB radio stations

Should you wish to use your radio for DAB reception in a new location, or if no stations were
detected during the initial scan, you can follow this procedure to allow your radio to find out which
DAB radio stations are available.
1. Ensure that the telescopic antenna is extended, and then press the Mode button as needed to
select DAB radio mode.
2. Once in DAB mode press the Menu button.
. Rotate the Tuning Control Rotary until 'Scan' is highlighted on the display.
. Press the Tuning Control Rotary to initiate the scan. The display will show 'Scanning' and
your radio will perform a scan of the DAB Band III frequencies. As new stations are found the
station counter will increase and stations will be added to the list. The bar graph indicates the
progress of the scan.
1
2
3,4
GB